蜜臀一区二区三区,盗摄,天天干,天天日,无码gif

你好,歡迎訪問濟南金昊化工有限公司!

專注品質,信賴服務

我們用心做產品服務

咨詢熱線:

13655318786

行業新聞

您現在的位置: 網站首頁>>新聞中心>>行業新聞順酐處理廢水的工藝是什么?

順酐處理廢水的工藝是什么?

來源:http://www.bj1866.cn/ 日期:2022-06-01 發布人: 瀏覽次數:0
就順酐廢水處理工藝而言,具體工藝如下:
As for the maleic anhydride wastewater treatment process, the specific process is as follows:
(1)中和絮凝-壓濾沉淀段。原水儲罐混合廢水經離心泵送入中和絮凝沉淀池,在攪拌條件下加入定量固體氧化鎂粉和中性絮凝劑。調節pH值8.0,離心泵將懸浮液輸送程控自動密封壓濾機。
(1) Neutralization flocculation pressure filtration sedimentation section. The mixed wastewater from raw water storage tank is sent to neutralization flocculation sedimentation tank by centrifugal pump, and quantitative solid magnesium oxide powder and neutral flocculant are added under mixing conditions. Adjust the pH value to 8.0, and the centrifugal pump will deliver the suspension to the program-controlled automatic sealing filter press.
(2)蒸發階段過程。中和池濾液送入效應蒸發器,濾液蒸發濃縮后進入中和池。
(2) Evaporation stage process. The filtrate from the neutralization tank is sent to the effect evaporator, and then enters the neutralization tank after evaporation and concentration.
(3)膜處理部分。蒸發后,兩級蒸發液經過微濾和納濾處理。淡水透光率達85%,COD在500毫克/升以下。濃水進入一級,淡水由三層反滲透膜分離。膜分離裝置設計處理能力為5.0m3/h,淡水4.25m3/h,水約占總量的85%。處理后COD不超過60毫克/升,BOD不超過30毫克/升。為保證污水處理系統平穩運行,調整廢水預處理投加量,降低投加負荷,調整中和劑、絮凝劑的加入時間和攪拌時間。在團簇效應的作用下,廢水絮凝劑顆粒大量增加,有效降低了處理后的COD指標。
(3) Membrane treatment part. After evaporation, the two-stage evaporation liquid is first treated by microfiltration and nanofiltration. The light transmittance of fresh water reaches 85% and COD is below 500 mg / L. The concentrated water enters the first stage, and the fresh water is separated by three layers of reverse osmosis membrane. The designed treatment capacity of the membrane separation unit is 5.0m3/h, fresh water is 4.25m3/h, and water accounts for about 85% of the total. After treatment, COD shall not exceed 60 mg / L and BOD shall not exceed 30 mg / L. In order to ensure the stable operation of the sewage treatment system, adjust the dosage of wastewater pretreatment, reduce the dosage load, and adjust the addition time and mixing time of neutralizer and flocculant. Under the effect of cluster effect, the flocculant particles of wastewater increase greatly, which effectively reduces the COD index after treatment.
本文的精彩內容由順酐廠家提供知識提供,本網站還有很多的精彩內容,更多的內容您可以點擊進入:http://www.bj1866.cn/我們有專門的客服為您解答問題
The wonderful contents of this article are provided by maleic anhydride manufacturers. There are many wonderful contents on this website. You can click to enter more contents: http://www.bj1866.cn/ We have special customer service to answer your questions

相關新聞